Table base.‎ Steel legs.‎ E2.‎ A classic of industrial design since 1965.‎Demountable table base in tubular steel, a reinterpretation of the famous design by Egon Eiermann.‎ Structure in round tubing (external diameter 21.‎3 mm, thickness 1.‎75 mm) composed of 2 side uprights and 2 crossed cross braces (central or offset configuration).‎Supplied complete with screws and PVC end caps.‎ Weight depending on configuration: 6.‎0 to 7.‎5 kg.‎Height660 mm(to be combined with adjustable feet)720 mm(standard office/dining room height)Custom made(contact us)For use as a desk or dining table, we recommend 720 mm under the tabletop.‎ You can choose a 660 mm base with leveling feet (+25 mm min.‎), or a 720 mm base without feet.‎ With a tabletop 25-30 mm thick, you will achieve the ideal height of 750 mm.‎Depths600 mm700 mm780 mmCustom made(contact us)We recommend an overhang of approximately 10 cm on each short side of the tabletop.‎ The base depth should therefore be approximately 200 mm less than that of your tabletop.‎Width1000 mm1350 mmCustom made(contact us)For optimal use, the tabletop can overhang by 250 to 350 mm on each long side.‎ The width of the base should therefore be 50 to 70 cm less than that of your tabletop.‎ If you plan to have a storage unit under the desk (standard width 450 mm), size it accordingly to position it next to the base.‎ For a dining table with seating at the ends, allow for an overhang of 35 to 50 cm on each side.‎Crossbar configurationOffset cross braces(usage – office, work surface)Cross braces in central position(use – dining table, meeting)Offset crossbars are suitable for tables used on only one side (desk, drawing table).‎ Central crossbars provide optimal legroom on all sides (dining table, meeting table).‎MaterialsRound steel tube: Outer diameter 21.‎3 mm / Wall thickness 1.‎75 mmSteel screws includedProtective PVC tipsWeight6.‎0 to 7.‎5 kg depending on configurationAssemblyDemountable structure, screw assembly without special tools