Follow Bench

FOLLOW is height-adjustable table that effortlessly and noiselessly adjust to the user’s posture and need.‎ Two desktops joined together by a single painted metal frame, each with a height adjustment handle in reinforced nylon.‎ Available with multifunction unit for electrical wiring integrated in the top and with cable tray.‎ A table that can be placed and moved anywhere: it is not connected to any cable as it does not need any electricity supply.‎ Also available the sound absorbing partition panel able to create two autonomous but at the same time dynamic work spaces.‎ The Follow tables collection it was acknowledged for its uniqueness and technological excellence by the European Union's research and innovation program H2020.‎The table frame (1140x980 mm for 299B Small - 1540x980 mm for 299B Large) is designed for optimal operation within a weight range (tabletop weight + accessory weight) between 23 and 31 kg per workstation/top for 299B Small, and between 30 and 38 kg for 299B Large.‎A load on the frame exceeding the maximum weight indicated (tabletop weight + accessory weight) causes a rapid lowering of the top when unlocked.‎A load on the frame below the minimum weight indicated (tabletop weight + accessory weight) causes a rapid raising of the top when unlocked.‎If a lighter tabletop is used or the workstation is not loaded, the installation of the "counter-balance kit" accessory (code 299FZ) can reduce the upward force by 1.‎2 to 9.‎6 kg, allowing the optimal operating range to be achieved.‎If a heavier tabletop is installed or if the workstation is further loaded (computer, phone, etc.‎), the upward force can be increased by 1.‎2 to 7.‎2 kg by removing six pre-mounted counterweights from the crossbeam.‎