Holding a sheet of drywall overhead while someone drives screws is a fast way to a strained back or a cracked panel. This 11-foot drywall lift does the holding for you. Load a standard 4-by-8-foot sheet onto the cradle, crank the telescopic arm to the right height, and lock it in place. The arm extends from 3.5 feet to 11 feet, reaching flat ceilings and sloped walls alike. A 360-degree swivel and up to 60-degree tilt let you position panels against angled ceilings without shimming or propping.The tripod base sits on three locking casters that roll across the job site and lock once the lift is in position. The steel frame supports up to 150 pounds, enough for standard drywall, sheetrock, cement board, and ceiling tiles. When the room is hung, the lift folds down for storage in a van or against a shop wall.This lift works for residential renovations, commercial construction, and ceiling repairs. Always lock the casters before raising a panel, and keep hands clear of moving parts while cranking. The black powder-coated finish resists rust and makes the lift easy to spot on a busy site.SpecificationsMax Height: 11 ftMin Height: 3.5 ftLoad Capacity: 150 lbPanel Size: 4 x 8 ftRotation: 360-degree headTilt: Up to 60 degreesBase: Tripod with three locking castersMaterial: Steel with black powder coatWeight: Approx. 56 lbIncluded1 × Drywall Panel Lift with Telescopic Arm1 × Tripod Base with Casters1 × User Manual