The wood stove gasket is useful for sealing home heating wood stoves, fireplaces and ovens, replacing your old or worn gaskets in fireplace or stove doors to restore their burning efficiency.SpecificationColor: WhiteMaterial: FiberglassTotal Size: 25 x 2000mm / 1" x 79" (OD*L)Tape Size: 50 x 100mm / 1.97 x 3.94 inch (W*L)Maximum Temperature: 550℃Operating Temperature Range: 450 - 550℃Packing List: 1 Pcs x Wood Stove Gasket; 2 Pcs x High Temperature Resistance End TapeAdvantage1. Made of durable fiberglass as raw material, has high-temperature resistance, heat-resistance, wear-resistance, good thermal stability, and can be used for a long time.2. Good sealing performance and tight weave design can improve combustion efficiency, and the length of the rope can be trimmed to suit the size of the stove as needed.3. The included high temperature resistance end tape can connect the two ends of stove gasket ropes together to extend the length and prevent the fibers from loosening. No need to buy tape separately, saving you expense.Instruction1. Make sure the stove is cold and clean;2. Apply a coat of gasket cement to the contact surfaces of the door channel;3. Trim the length of the gasket to your needs, then press the new gasket into the gasket cement  to secure, close the door to check for air tightness;4. Finally, remove the spilled or excess gasket cement with a damp cloth.NOTE: Please note that the adhesive joint tape has weak adhesion at normal temperature and only has good adhesion at high temperatures. Therefore, it is best to heat the tape before use. The gasket cement is not included and choose the right size according to your need.