FOLLOW is height-adjustable table that effortlessly and noiselessly adjust to the user’s posture and need. Single working desk with painted metal frame, available in different sizes from 1200 to 1800 mm width. Height adjustment handle in reinforced nylon. Available with multifunction unit for electrical wiring integrated in the top and with cable tray. A table that can be placed and moved anywhere: it is not connected to any cable as it does not need any electricity supply. The Follow tables collection it was acknowledged for its uniqueness and technological excellence by the European Union's research and innovation program H2020.The table frame (1140x690 mm for 299F Small and 1540x690 mm for 299F Large) is designed for optimal operation within a weight range (top weight + accessory weight) between 23 and 31 kg for 299F Small and between 30 and 38 kg for 299F Large.A load on the frame exceeding the maximum indicated weight (top weight + accessory weight) causes the top to lower quickly when unlocked.A load on the frame below the minimum indicated weight (top weight + accessory weight) causes the top to rise quickly when unlocked.If the use of a lighter top is planned or if no additional load is planned on the worktop, installing the “counter-balance kit” accessory (code 299FZ) can reduce the upward force by 1.2 to 9.6 kg, allowing the optimal operating range to be reached.If the installation of a heavier top is planned or if the worktop is expected to be loaded further (computer, phone, etc.), it is possible to increase the upward force by 1.2 to 7.2 kg by removing six pre-installed weights from the crossbar.