Boat Throttle Control, Top-Mounted Outboard Remote Control Box, Marine Throttle Control Box With Power Trim Switch - Yamaha

Boat Throttle Control: Our top-mounted outboard remote control kit is compatible with Yamaha outboard motors (4 strokes) / Evinrude Johnson outboard motors. It's made from aluminum ADC2+ASA and an ABS shell handle that resists cracking. The plastic button ensures firm and reliable operation. The Yamaha boat / Evinrude Johnson boat throttle control box is more robust and withstands multiple push-pull maneuvers.  Smooth Operation: Press the neutral release button to shift into gear. Push forward about 35° into forward gear, and push back about 35° into reverse gear. The front-end friction adjustment knob provides personalized control over throttle operation, allowing you to manage speed and thrust with precision. For Yamaha option: With the control lever in Neutral, push the free accelerator button to open the throttle for starting and warm-up.  Trim and Tilt Switch: Enhance your boating experience with the power trim and tilt switch directly on the control lever handle. This design allows for easy adjustment of the stern engine's position, aiding in cargo loading/unloading and preventing prolonged engine immersion. Press "↑" to tilt the engine upward and "↓" to tilt the engine downward.  Low-Temperature Operation: The outboard remote control is equipped with a low-temperature air-fuel ratio adjustment function, which can adjust the fuel and air mixture ratio in cold weather, helping to ensure that the vessel can operate reliably in extreme temperatures.  Emergency Stop Switch Lanyard (for Evinrude Johnson option): Our outboard engine throttle control box includes an emergency stop switch lanyard. This lanyard halts the engine automatically if the driver is unexpectedly displaced, preventing accidents. The lanyard can securely attach to the driver's waistband or wrist for added security.  4.6 ft Control Cable (for Yamaha option): Our remote control box has a 4.6 ft/1440 mm long harness with a 5-pin plug, ensuring ample reach for remote power supply setups. During installation, turn off the ignition, remove the key, disconnect all cables and power, and measure the cable length.  Long Control Cable (for Evinrude Johnson option: Our remote control box has a 2.1 ft/640 mm long harness with a 6-pin connector, and a 2.4 ft/740 mm long harness with 3-pin connector, ensuring ample reach for remote power supply setups. During installation, turn off the ignition, remove the key, disconnect all cables and power, and measure the cable length.   Yamaha option Package Content 1 x Outborad Remote Control 5 x M5*30 Round Head Screws 4 x Flat Washers (6) 4 x M5 Hex Nuts 1 x M5 Copper Nut 2 x Spring Clips 1 x Rubber Sleeve 2 x Throttle Connectors 1 x Foam Ring 2 x Plastic Mounting Blocks 1 x Protective Rubber   Evinrude Johnson option Package Content 1 x Outborad Remote Control 2 x Ignition Keys 1 x Lanyard Cord 4 x M5*42 Mounting Screws 4 x M5 Hex Nuts 4 x Flat Washers (6) 4 x M5*38 Self-Tapping Screws 2 x Lockpins 2 x Flat Washers (5) 1 x Buzzer Assembly 2 x Rubber Sleeves 1 x Mounting Block 1 x Foam Washer 1 x Instruction Manual