Matte paint of exceptional depth for walls and ceilingsINTERIORFor vertical surfaces and ceillings. For use in all indoor rooms.Available in all the colors of the collections (e.g. Sarah Lavoine, Itineraires, etc...)Base surfaces: For application to all ordinary and correctly-primed structural surfaces.Water-dilutable Powder Matte Finish combines the properties of a glycerophtalic interior paint (highly-opacifying, with an excellent round finish and exceptional decorative properties) with those of a water dispersion paint (odourless and rapid-drying, with tools washable in water). Class 2 wet abrasion resistance(2) : easy maintenance. Suitable for application by roller or brush. Whitewashed appearance achievable by the application of the whitewashing effect. Also treated for the prevention of the appearance of rust spots on nail heads and screw heads.APPLICATIONBase surfaces must be entirely free of dust, dry, sound, of uniform quality and thoroughly cleaned.Apply a coast of primer and/or undercoat which is appropriate to the base surface and the shade.EQUIPMENT FOR APPLICATIONApply using a 1/2’’ (12 mm) non-drip roller for a rounded dappled effect, with a 3/8’’ (10 mm) roller for a taut effect, or using an airless sprayer or pneumatic spray gun. Option for smoothing with a spalter brush to achieve a smoothed effect.Once the undercoat is completely dry, apply two coats of POWDER MATTE using a brush or roller, diluting with a maximum of approximately 5% of water.In an airless sprayer or conventional spray gun, depending upon the device used, the paint may require dilution with 10 - 20% of water. A number of tests should be executed on card or on a concealed area, inorder to arrive at the optimum dilution.Advice: We recommend the testing of the dilution factor on a small surface, in order to arrive at the appropriate percentage (the paint must not resist, but must slide easily onto the base surface to be covered).Optimum dilution of the paint permits correct application (a good finish) and easy application.